CMXGTAMDZ22C OPERATOR’S MANUAL

Loading ...

INSTALLING AND ADJUSTING THE HANDLE

Installing the Handle

1. Push the handle down onto the upper shaft housing (Fig. 8 or

Fig. 9). Make sure the bolt hole faces to the right (Fig. 8 or Fig. 9).

2. Insert the bolt into the bolt hole and push it through (Fig. 8 or

Fig. 9). Tighten the bolt with a flat-head screwdriver, but do not

tighten the bolt completely .

3. Hold the unit in the operating position (Fig. 13). Move the handle

up or down the upper shaft housing to a comfortable location

(Fig. 8 or Fig. 9). Make sure the handle is positioned beyond the

end of the safety label (Fig. 8 or Fig. 9).

4. Tighten the bolt with a flat-head screwdriver until the handle is

secure.

Adjusting the Handle

If the handle requires adjustment:

1. Loosen the bolt with a flat-head screwdriver (Fig. 8 or Fig. 9).

2. Hold the unit in the operating position (Fig. 13). Move the handle

up or down the upper shaft housing to a comfortable location

(Fig. 8 or Fig. 9). Make sure the handle is positioned beyond the

end of the safety label (Fig. 8 or Fig. 9).

3. Tighten the bolt with a flat-head screwdriver until the handle is

secure.

Fig. 8

Bolt Hole

Handle

Upper Shaft

Housing

Bolt

Safety Label

Fig. 9