Loading ...
Loading ...
Loading ...
Consumer Defined Controls
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These
include the Oven Lockout, Silent Control Operation and Temperature Display features.
Setting Oven Lockout Feature
The _ pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents
the Oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.
iNSTRUCTiONS PRESS DISPLAY
To activate the Oven Lockout feature
1.
2.
Press and hold for 3 seconds (Figure 1).
After 3 seconds "LOC" will appear, a beep will sound and "DOOR
LOCKED" will flash in the display. Once the oven door is locked
the "DOOR LOCKED" indicator will stop flashing and remain on
along with the "LOC".
To reactivate normal oven operation:
1. Press and hold for 3 seconds. A beep will sound. "LOC" will
disepear and "DOOR LOCKED" will flash in the display until the
oven door has completely unlocked (figure 2).
, for 3 seconds
, for 3 seconds
Figure 1
Figure 2
2. The wall oven is again fully operational.
Setting Silent Control Operation
The STARTTIME _ and CLEAN _ea_) pads control the Silent Control operation feature. The Silent Control
operation
V v
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can
be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
iNSTRUCTiONS PRESS DISPLAY
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent operation press and
hold _rar_. "0:00" will appear and "DELAY" will flash in the display
(Figu re 3). After 7 seconds ":SP" will appear in the display (Figu re 4).
2. Press _an) to switch between normal sound operation and silent
g
operation mode. The display will show either ":SP" (Figure 4) or
":--" (Figure 5).
If ":SP" appears (Figure 4), the control will operate with normal
sounds and beeps. If":--" appears (Figure 5), the control is in the
silent operation mode.
3. Press I to accept the change or press _to reject the
change.
Figure 3
Figure 4
Figure 5
20
Loading ...
Loading ...
Loading ...