Loading ...
Loading ...
Loading ...
24 LOCATING YOUR BARBECUE
Most importantly, this is an outdoor appliance. Ensure your
barbecue is positioned safely away from anything that can catch
fire.
Outdoors Use Only
Under no circumstances is this barbecue to be used indoors.
This includes garages or any other enclosed area.
Clearance from Combustibles: Ensure your barbecue remains
at a distance of at least 45cm (18”) from any combustible
material such as wood, gyprock, paper and plants. Do not store
combustible materials, gasoline or flammable liquids or vapours
within 45cm (18”) of the barbecue.
Adequate Ventilation
Ensure there is adequate ventilation for both the barbecue and
cylinder. This is required not only for proper combustion, but
also to prevent gas build up.
75mm ventilation and air-intake gap is to be left at rear of the
barbecue in fixed installations.
Firm Level Surface
Use your barbecue only on a firm level surface. This barbecue is
not designed for recreational vehicles, and shall not be installed
on a boat or any marine craft.
Protection From Weather: Keep the barbecue protected from
adverse weather, including rain and high winds.
Polyvinyl covers are available that have been specially designed
for this range of barbecues. Allow clear access to the entire gas
supply hose and regulator.
Maintenance Access: When your barbecue is installed, you
should be able to access the gas supply line including the gas
piping or hose, gas regulator, gas cylinder and any shut off
valves.
Partial Enclosures: Many backyards have areas that are partially
closed off, such as balconies and pergolas. In some cases, it is
hard to decide whether these partially enclosed areas should be
classified as indoor areas. This manual provides clear definition
of such areas in page 17 for your reference.
Connect the Regulator to the gas Cylinder
WARNING
Verify ‘Gas Type’ label & data plate attached to side of barbecue
is correct for the gas you are about to connect to.
The hose and regulator is connected to the barbecue and leak
tested at factory. Do not disassemble unnecessarily.
1. Make sure burner valves are in the ‘Off’ position.
2. Screw regulator side to the cylinder, and hand-tighten. See
more details on page 4.
NOTE: Do not modify this appliance. Any deviation from the
factory settings could result in a safety hazard.
• If moving the barbecue from one place to another, never
drag the cylinder behind. Disconnect the cylinder first,
move, and re-connect once reached the new location.
• For storage and cylinder exchange, disconnect hose at the
cylinder only, do not disconnect hose from the appliance.
• If you have purchased a trolley with a Side-Burner, please
refer to Trolley instruction book for correct connection of
the Side-Burner to the gas supply.
LOCATING YOUR BARBECUE
Loading ...
Loading ...
Loading ...