Loading ...
Loading ...
Loading ...
AS YOU COMPLETE
BE O BSEBV,CE S "V'OE
Check Brake Operation _
Check Tire Pressure
Check Operator Presence and
T Interlock Systems
a Check for Loose Fasteners _ II_s
Sharpen/Replace Mower Blades i3
T Lubrication Chart
0 Check Battery Level
R Clean Battery and Terminals
Check Transaxie Cooling
Check V-Belts
Check Engine Oil Level I1_
Change Engine Oil (with oil filter) _1,2
,I
E Change Engine Oil (without oil filter) _1,2
U Clean Air Filter
G clean Air Screen
Inspect MuffledSpark Attester
E Replace Oil Filter (If equipped) _,.
C_ean Engine Cooling Fins
Replace Spark Plug _
Replace Air Filter Paper Cartridge _2
Fuel FilterReplace
1 - Change more often when operating under a heavy load or 3 - Replace blades more often when mowing in sandy soil.
in high ambient temperatures. 4 - Not required if equipped with maintenance-free battery.
2 - Service more often when operating in dirty or dusty conditions. 5 - Tighten front axle pivot bolt to 35 ft.dbs, maximum.
DO not overtigbten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not @ S
cover items that have been subjected to Zerk
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this @FrontWheel
manual. Bearing
Some adjustments will need to be made Zerk
periodically to properly maintain your
tractor.
All adjustments in the Service and Adjust- ®En
ments section of this manual should be
checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
@ Spindle
Zerk
I
@Front Wheel
Rearing Zerk
i I
I
I
I _ --i T- -- J
_SAE 30 or 10w30 MOTOR OIL
@GENERAL PURPOSE GREASE
®REFER TO Maintenance "ENGINE"
SECTION
shift
Pivots
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of the
self-lubricating bearings. If you feel they
must be lubricated, use only a dry, pow-
dered graphite type lubricant sparingly.
17
Loading ...
Loading ...
Loading ...