GE - General Electric JP346CM1CC GE electric cooktop

User Manual - Page 11

For JP346CM1CC.

PDF File Manual, 20 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Cleaningtheglass coo/aop. 9e.com
Clean your cooktop after
each spill. Use ceramic
cooktop cleaner.
Normal Daily Use Cleaning
ONLY use cermnic cooktop cleaner on
tile glass cooktop. Other creams may not
be as effective.
To maintain and protect tile surti_ce of
yore" glass cooktop, tollow these steps:
[] Betore using tile cooktop tiw
tile fi_t time, clean it with ceramic
cooktop cleaner. This helps promct
tile top and makes cleanup easier:
[] Daily use of ceramic cooktop
cleaner will help keep tile cooktop
looking new.
[] Shake the cleaning cream well.
Apply a few drops of ceramic
cooktop cleaner directly to tile
cooktop.
[] Use a paper towel or cleaning pad
tk)I" ceI'aIllic cooktops to clean tile
entire cooktop S/liS_ilce.
[] Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse,
NOTE: It isvery important that you DONOT
heat the cooktop until it has been cleaned
thoroughl_
Burned-On Residue
WARNING: DAMAGE to gour glass surface
"_ may occur if you usescrub pads other than
those recommended.
Useacleaningpadforceramic
cooktops.
[] Allow tile cooktop to cool.
[] Spread a few drops of ceramic
cooktop cleaner on tile entire
burned residue area.
[]
Using tile included cleanin,*_toad
fin" ceramic cooktops, mb tile
residue area, ali ,))lying, I)ressure
as needed.
[]
[]
If any residue remains, repeat tile
steps listed above as needed.
For additional protection, after
all residue has been removed,
polish tile entire surfilce with
cei'ai//ic cooktop cleanei" and a
paper towel.
The ceramic cooktop scraper
and all recommended supplies are
available through our Parts Cente_
See instructions under "To Order
Parts" section on next page.
NOTE: Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
[] Allow tile cool<top to cool.
[] Use a single-edge razor blade
scraper at approximately a 45 °
angle against tile glass surihce
and scrape tile soil. It will be
necessalw to apply presstlre to
tile FaZOF scraper ill order to
remove tile residue.
[]
After scraping with tile razor
scrapei; spread a few drops of
cel';ll_lic cooktop cleaner on tile
entire burned residue axea. Llse
tile cleaning pad to remove any
remaining residue.
[]
For additional protection,
after all residue has been
removed, polish tile entire
sm'fhce with ceramic cooktop
cleaner and a paper towel.
//
Loading ...
Loading ...
Loading ...