Loading ...
Loading ...
Loading ...
ONfOFF
SWtTCH
\
_G NUT
;ECOND
RING NUT
©
©
#10 SELF
y BOLT 318 X 2-I/2 TAPPING
SCREW
% SWITCH
3/8 FLAT WASHER '_ MOUNTING
/ 31BCABLE CLIP (3).._ BRACKET
f I t
REA,R QUAO_ba, NT #
3t8 LOCK NUT
CABLE
TOW BAR TUBE
WIRE HARNESS HITCH ASSEMBLY
INSTALL THE WIRE HARNESS AND THE
ON/OFF SWITCH
• Slide the Wire Harness under the Cable Anchor of
the Hitch Assembly.
• Connect two 1/4 Female Spade Connectors from the
Wire Harness to the prongs of the ON/OFF Switch.
o Insert the Seat Switch Plug of the Wire Harness into
the Hitch Assembly, Pulling it up and through the
right top side of the Switch Mounting Bracket.
• Remove one Ring Nut from the ON/OFF Switch and
adjust the second Ring Nut 1/4 Inch from the top of
the threads.
• Insert the ON/OFF Switch up through the Switch
Mounting Bracket and secure it by reinstalling the
Ring Nut.
NOTE: The notch in the threads of the ON/OFF Switch
must face toward the "ON" of the ON/OFF Switch Decal
to insure proper ON/OFF control.
CABLE EYELET
MOWER BLADE
CLUTCH LEVER
HOUStNG
CABLE
AN(
NUT 5/16 (2)
CABLE
GUIDE
WIRE HARNESS
FIG. 1
BOLT 1/4 X 3t4
HITCH
ASSEMBLY
SWITCH
MOUNTING
BRACKET
SWITCH
RING NUT
SEAT SWITCH
CONNECTOR
LOCK NUT
7
Loading ...
Loading ...
Loading ...