Loading ...
Loading ...
Loading ...
wolfappliance.com | 5
Specifications
Plumbing Requirements
PLUMBED MODELS ONLY
Installation must comply with all applicable plumbing
codes.
The drain tube connection must be a minimum 2"
(51)
below the unit and a minimum 4"
(102) from the floor.
Locate the drain and water connections below the unit
or in an adjacent cabinet. Any opening into the adjacent
cabinet must meet the following: the longest dimension of
the opening shall not be more than 1⁄"
(38). The edges of
the opening must be smooth and round.
IMPORTANT NOTE: The drain location can vary, but must
be within reach of the corrugated tubing. Do not extend or
reduced the drain tubing. A drain line high loop is required.
Refer to the illustration below.
PLUMBING REQUIREMENTS
Water Connection 6.5' (2 m) braided tubing with
⁄" female compression fitting
Drain Connection 10' (3 m) corrugated tubing
Pressure 15–145 psi (1–10 bar)
DRAIN
CONNECTION
2" (51)
MIN
2
3
/4" (70)
TO
5" (127)
2" (51)
TO
27
1
/2"
(699)
Drain connection
Connect the water supply to a cold water house supply
with an easily accessible shut-o valve between the supply
and the unit.
Purge the water supply prior to final connection to the
unit. This will remove any debris that may be present in the
tubing from installing the new water supply. Connect the
braided tubing from the unit to the house water supply with
the fitting provided. Check all water supply fittings for leaks.
Loading ...
Loading ...
Loading ...