GE - General Electric GTS18DCPSLCC GE refrigerator - p series

User Manual - Page 10

For GTS18DCPSLCC.

PDF File Manual, 96 pages, Download pdf file

Loading ...
Loading ...
Loading ...
About the automatic icemaker.
A newly-installed refrigerator may take 12-24 hours to begin making ice.
Automatic Icemaker (onsomemodels)
There are two types of icemakers:
Powerswitchmodel
Feeler arm model
The icemaker will produce approximately
3 to 3-1/2 lbs. of ice in a 24-hour period,
depending on tile freezer compartment
temperature, room temperature, number
of door openings and other use conditions.
There are two types of icemakers: power
switch models and fizeler arm models.
If the refrigerator is operated before the
water connection is made to tile icemaket,
set the power switeh to 0 (0ffJor move the
feeler arm to rile STOP (up) position.
When the refrigerator has been connected
to tile water supply, set tile power switch to
rile I (on) position or move tile feeler arm to
rile ON(down) position. On power switch
models, the green light will come on.
The icemaker will fill with water when it
cools to I5°E A newly-installed refrigerator
may take 19 to 24 hours to begin making
ice cubes.
Once the icemaker starts to make ice, it
may rake up to 48 hours to fill the bin,
depending on tile temperature settings
and number of door openings.
Throw away the first few txatehes of ice to
allow tile water line to clear.
Be sure nothing interferes with the sweep
of the fizeler arm.
When the bin fills to the level of the feeler
arm, tile icemaker will stop producing ice.
It is normal for several cubes to be joined
together.
If ice is not used frequently, old ice cubes
will become cloudy, taste stale, shrink or
fuse together.
On power switch models, tile green power
light will blink if ice cubes get stuck in the
icemaker. To correct this, set the power
switeh to 0 (0ffJand remove the cubes. Set
tile power switch to I(on) to restart the
icemaker. After the icemaker has been
turned on again, there will be a delay of
about 45 minutes before tile icemaker
resumes operation.
NOTE:Inhomeswith lower4han-averagewater
pressure,youmayheartheicemakercyclemultiple
timeswhenmakingonebatchof ice.
Icemaker Accessory Kit
ffyour refrigerator did not already come
equipped with an automatic icemakm,
an icemaker accessory kit is available at
extra cost.
Check the back of the refiigerator
for the specific icemaker kit needed fbr
your model.
Water Filter Accessory
Tile water filter is an option at extra cost
and is available from your dealer: Specif}g
WR97X02f 4. It has complete installation
instructions and installs on f/4" O.D.
copper water line or plastic tubing that is
included in a GE SmartConnect _"
Refrigerator Tubing kit. When using the
plastic tubing, an additional piece of plastic
tubing (WX08X10002) must also be
ordered since the plastic tubing should
not be cut.
NOTE:TheonlyGEapprovedplastictubingis that
suppliedinGESmartConnect_ RefrigeratorTubing
kits.Donot useanyotherplasticwatersupplyline
becausetheline is underpressureat all times.
Certaintypesofplasticwill crackorrupturewith
ageandcausewaterdamageto yourhome.
10
Loading ...
Loading ...
Loading ...