Loading ...
Loading ...
Loading ...
8
2. Setting up the monitor
Resolutionnotication
This monitor is designed for optimal
performance at its native resolution, 1280
× 1024 @ 60 Hz. When the monitor is
powered on at a different resolution, an
alert is displayed on screen: Use 1280 ×
1024 @ 60 Hz for best results.
Display of the native resolution alert can be
switched off from Setup in the OSD (On
Screen Display) menu.
Physical Function
Tilt
20
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that the
monitor does not tilt downward by
more than -5 degrees.
• Do not press the screen while adjusting
the angle of the monitor. Grasp only
the bezel.
2.3 Remove the Base Assembly for
VESA Mounting
Before you start disassembling the monitor
base, please follow the instructions below to
avoid any possible damage or injury.
1. Place the monitor face down on a smooth
surface. Pay attention not to scratch or
damage the screen.
2. Use a athead screwdriver to remove four
mylars from the hinge cover.
Loading ...
Loading ...
Loading ...