Loading ...
Loading ...
Loading ...
6. Insert the push button end of the "Pos-I-
Lock" hose into the inlet of the vac. The
hose should snap into place. To remove
the hose from the vac, press the release
button in the hose assembly and pull the
hose out of the vac inlet, as shown.
7. Place the utility nozzle securely on the
opposite end of the hose and the vac is
ready for use.
NOTE" The opposite end of the hose is
removable if more hoses need to be
attached for more length from the vac. To
remove the swivel portion of the hose,
grasp the hose swivel and firmly pull it out
of the flexible hose. Connect the soft end
of a second hose (accessory #9-17820)
Cord Wrap , On-Off
Switch
Blowing
Port _ Vacuum
Lid ! Port
Handle
into the swivel end of the original hose by
forcing the sections together until they fit
tightly. - OR -
Purchase a 9-16917 hose-hose connec-
tor. Install the hose-hose connector on the
end of the hose connected to the vac and
connect the other hose to the hose con-
nector.
Release Press and
Button Pull
\ c:3>
Release
Button
Drum
Drain
Swivel
End
Utility
Larger
Opening
Power
Assembly
Hose
Of Hose
Hose
Lock
To Store Your Accessories
1. Slide extension handles and accesso-
ries into the slotted areas of the
caster feet for storage.
2. To remove the accessories, rotate and
pull upward.
7
Loading ...
Loading ...
Loading ...