Loading ...
Loading ...
Loading ...
Caution
Precautions on Multi Shot Noise Reduction
If there is significant misalignment in the image due to camera shake, the noise
reduction effect may become smaller.
Be careful about camera shake in handheld shots. Using a tripod is recommended.
If you shoot a moving subject, the moving subject may leave afterimages.
Auto image alignment may not function properly with repetitive patterns (lattice,
stripes, etc.) or flat, single-tone images.
If the subject’s brightness changes as the four consecutive shots are taken,
irregular exposure in the image may result.
After shooting, it may take some time to record an image to the card after
performing noise reduction and merging the images. “BUSY” is displayed as
images are processed, and shooting is not possible until processing is finished.
[Multi Shot Noise Reduction] is not available when any of these features are set:
bulb exposures, AEB or WB bracketing, RAW or RAW+JPEG, long exposure noise
reduction, multiple exposures, HDR mode, HDR PQ, focus bracketing, or electronic
shutter.
Flash photography is not available. Note that the AF-assist beam of Speedlites may
be fired, depending on the [ : AF-assist beam firing] setting.
[Multi Shot Noise Reduction] is not available (not displayed) when recording
movies.
The camera automatically switches to [Standard] when RAW or RAW+JPEG
image quality is set.
The camera automatically switches to [Standard] if you set the power switch to
< >, replace the battery or card, or switch to [ ] or [ ] mode or movie
recording.
219
Loading ...
Loading ...
Loading ...