Loading ...
Loading ...
Loading ...
lock screws fixing the top insert (2) to the cabinet. (Fig. 1)
2. Remove the two lock screws fixing the right top hinge (3) to the cabinet. Be careful to hold the glass
door firmly after removing the screws. At the same time disconnect the right top hinge from the hook
end of the self-closing mechanism. (Fig. 2)
3. Lift up to remove the glass door and place it on a padded surface to prevent scratching.
4. Remove the door shaft assembly (4) from the door bottom at the right side and install it at the
designated position of the door bottom at the left side. (Fig. 3)
5. Remove the lower hinge (5) and rotate it 90°, then install it at the designated position on the left side.
(Fig. 4)
6. Remove the door plug from the left side of the door top and then take out the hook end hidden inside
the door.
7. Set the glass door into the designated position. Take the left top hinge (6) from the plastic bag that
includes the instruction manual and connect it with the hook end at the left side of the door. Then
rotate the hook end together with the left top hinge one and half circle counterclockwise. Install the two
lock screws to connect the left top hinge with the cabinet and tighten them before the door is leveled.
(Fig. 5)
8. Remove the handle from the left side of the door and install it on the right side. (See next section.)
INSTALLING THE STAINLESS STEEL HANDLE
This b
everage merchandiser includes a stainless steel handle that is
not required to operate the unit. To install the handle, follow the
instructions below:
Align the handle with the fixing screws packed together with the
handle, tighten the fixing screws using a Phillips head screwdriver
until the handle is both flush and secured tightly against the door
side. (DO NOT over-tighten as this will cause damage to the
stainless steel door.)
OPERATING YOUR APPLIANCE
It is recommended you install the appliance in a place where the ambient temperature is between 72º and
78ºF (23º-26ºC). If the ambient temperature is above or below the recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions
may cause interior temperatures to fluctuate. The range of 34º-43ºF (1º-6ºC) may not be reached.
CONTROL PANEL
ON/OFF Power
To turn the appliance ON or OFF, touch the
symbol and hold for 5 seconds.
8
Loading ...
Loading ...
Loading ...