Loading ...
Loading ...
Location Requirements Electrical Requirements
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Fallurs to do so can result In death, explosion, or fire.
Toensure proper ventilation for your refrigerator, allow for a 1,_,,
(1.25 cm) space at the top and behind the refrigerator. If your
refrigerator has as ice maker, allow extra space at the back for
the water line connections. When installing your refrigerator next
to a fixed wall, leave 21,_''(6.3 era) minimum on the hinge side
(some models require more) to allow for the door to swing open.
NOTE: It is recommended that you do not install the refrigerator
near an oven, radiator, or other heat source. Do not installthe
refrigerator in a location where the temperature will fall below
55°F (13°C).
1/2" (1.25 cm)//
JL
21/2''(6.3 cm)
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these Instructions can result in death,
firs, or electrical shock.
Before you move your refrigerator into itsfinal location, it is
important to make sure you have the proper electrical
connection.
Recommended Grounding Method
A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use an extension
cord.
NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, turn the refrigerator to OFE Depending on
your model, turn the freezer control to the word OFF, or press the
Freezer down arrow touch pad until a dash (-) appears in both the
Freezer and Refrigerator displays as shown. Disconnect the
refrigerator from the electrical source. When you are finished,
reconnect the refrigerator to the electrical source and reset the
temperature controls to the desired setting. See "Using the
Controls."
eOe eOe
COLDER _LD COLDER
FREEZER _commendedS_lings:4 REFRIGERATOR
ColdestSettings:7
WaterSupplyRequirements
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
TOOLS NEEDED:
• Flat-blade screwdriver • V4"Nut driver
• zAs"and _,_"Open-end or two • V4"Drill bit
adjustable wrenches • Cordless drill
IMPORTANT:
• All installations must meet local plumbing code requirements.
• Do not use a piercing-type or _6" (4.76 mm) saddle valve
which reduces water flow and clogs more easily.
• Use copper tubing and check for leaks. Install copper tubing
only in areas where the household temperatures will remain
above freezing.
Loading ...
Loading ...
Loading ...