Loading ...
Loading ...
Loading ...
4
Installation
FIG. 13
FIG. 14
FOAM SEAL
Cut foam window seal and insert it into the space between the upper and lower sashes (FIG. 14).
NOTE: It is difficult to lock the windows with the sash lock for Vinyl-Clad windows, so you can use lock by
(FIG. 13).
window itself.
FIG. 10
FIG. 11 FIG. 12
9
Measure the inner width
of the side curtain
1
2
3
4
5
6
7
8
9
10
1
112
13
14
15
1
2345
6
or
Measure the width of the inner side curtain with the provided ruler, as shown (FIG. 10). Mark a line on the
patterned side of the provided insulation panel according to the measured width, then cut out the insulation
panel along the line, as shown (FIG.11). Place the patterned side of the insulation panel to face inside your
room, then slide the insulation panel into the frame until the panel goes into the side curtain frame completely.
If the insulation panel does not slide in the frame smoothly, trim the insulation panel then try again, until the
insulation panel fits the frame, as shown (FIG.12). Repeat these instructions for the other side.
Loading ...