Loading ...
Loading ...
3
SAFETY INSTRUCTIONS
This manual explains the proper installation and use of your cooker hood, please
read it carefully before using even if you are familiar with the product. The manual
should be kept in a safe place for future reference.
Never to do:
• Do not try to use the cooker hood
without the grease filters or if the
filters are excessively greasy!
• Do not install above a cooker with
a high level grill.
• Do not leave frying pans unattended
during use because overheated fats
or oils might catch fire.
• Never leave naked flames under the
cooker hood.
• If the cooker hood is damaged,
do not attempt to use.
• Do not flambé under the cooker
hood.
CAUTION: Accessible parts may
become hot when used with cooking
appliances.
The minimum distance between the
supporting surface for the cooking
vessels on the hob and the lowest part
of the cooker hood. (When the cooker
hood is located above a gas appliance,
this distance shall be at least 65 cm)
The air must not be discharged into a
flue that is used for exhausting fumes
from appliances burning gas or other
fuels. Range hoods and other cooking
fume extractors may adversely affect
the safe operation of appliances burning
gas or other fuels (including those in
other rooms) due to back flow of
combustion gases.
These gases can potentially result in
carbon monoxide poisoning.
After installation of a range hood or
other cooking fume extractor, the
operation of open flued gas appliances
should be tested by a competent
person to ensure that back flow of
combustion gases does not occur.
It is necessary to allow disconnection
of the appliance from the supply after
installation.
The disconnection can be achieved by
having the plug accessible or by
incorporating a switch in the fixed wiring
in accordance with the wiring rules.
Always to do:
• Important! Always switch off the
electricity supply at the mains during
installation and maintenance such as
light bulb replacement.
• The cooker hood must be installed
in accordance with the installation
instructions and all measurements
followed.
• All installation work must be carried
out by a competent person or
qualified electrician.
Loading ...
Loading ...
Loading ...