Loading ...
Loading ...
-3-
208432-01
FRONT
REAR
TRANS
UP
8. Route wires through wire entrance hole in new chime base.
9. Mount chime base to wall using screws provided.
10. Connect wire “F” to screw terminal marked “FRONT”. Connect
wire “T” to screw terminal marked “TRANS”. Connect wire
“R” to screw terminal marked “REAR”* (See Figure 2).
*Note: Some installations may not include rear door push button.
INSTALL CHIME COVER
Press the chime cover onto the chime base (See Figure 3). To remove
chime cover, firmly grasp chime cover and pull.
Note: Never use cleaners or polishes. Never use any fluids on the
chime mechanism. Use dry cloth to clean chime cover and base.
Figure 2 - Mechanical Chime Wiring
Existing
Chime Wires
Wall
Replacement Chime Base
Rear Door
Push Button
(if Applicable)
FRONT
REAR
TRANS
UP
Figure 3 - Mounting Snap-On Cover
Illustrations may
vary from actual
chime unit.
Loading ...
Loading ...
Loading ...