Loading ...
Loading ...
Loading ...
8
FX2000 User's Manual
4. Connection
4.1 Install memory card
1) Take out the memory card from package box.
2) Insert the memory card into the FX2000 memory card slot perpendicularly.
Make sure is fully inserted in the right place with the “micro” label facing
upward.
Note: You can hear a clicking sound if you insert the memory card in the right place.
Press the card slightly, it will be ejected automatically.
4.2 Connect FX2000
1. Turn the ignition off.
2. Locate vehicle’s DLC socket: It provides standard 16 pins and is generally
located on driver’s side, about 12 inches away from the center of dashboard.
See Figure 2-2. If DLC is not equipped under dashboard, a label indicating
its position will be given. In case no DLC is found, please refer to Automobile
Repair Manual.
3. Plug one end of the diagnostic cable into the OBD II 16 pin connector of
FX2000, and connect the other end to the vehicle’s DLC.
Diagnostic Cable
FX2000
Vehicle
Figure 4-2
4. Turn the ignition on. Engine can be off or running.
5. After nishing, the system will start initializing. After initialization, the system
will enter the main menu interface.
Loading ...
Loading ...
Loading ...