Loading ...
Loading ...
Loading ...
Aboutthe automatic icemaker, gecom
A newly installed refrigerator may take 12 to 24 hours to begin making ice.
Automatic Icemaker
Power
Switch
Icemaker
Green
PowerLight
The icemaker will produce seven cubes
per cycle----ai)i)roxin/ately 100-130 cubes
in a 24-hour period, depending on fl'eezer
coi//l)ai'tillent tei//l)ei'attli'e _ i'ooi//
teml)erature, munber of door openings
and other use conditions.
See below fin" how to access ice and reach
the power switch on dispenser models.
If the reti_igerator is operated betore the
water connection is made to the icemakei;
set the power switch in the 0 (off) position.
When the refl-igerator has been connected
to the water supply, set the power switch to
the I (on) position.
The k'emaker will fill with water when it
cools to 15°F (-10°C). A newly installed
refi_igerator may take 12 to 24 hours to begin
making ice cubes.
You will hear a buzzing sound each dine
the k'emaker fills with watei:
Throw awm the first tew batches of ice to
allow the water line to clem:
Be sure nothing interteres with the sweep
of the teeler ram.
When the bin fills to the level of the teeler
aml, the icemaker will stop producing
ice. It is noi_nal tin" several cubes to be
joined togethei:
If ice is not used fl'equenfl> old ice cubes
will become cloudy, taste stale and shrink.
NOTE."In homes with lower-than-averagewater
pressure,you may hear the icemaker cyclemultiple
times whenmaking onebatch of ice.
Models without a shelf
above the ice bin
Toaccessice andreach the
icemaker rowerswitch:
o Lift flTebin, thenpull it
forwarduntil thebin stops.
Lower the bin to access ice
or reach the power switch.
NOTE:In order to take full advantage
of the tilt-out ice bbL only store items
on the shelf below the ice b#7that
are no tafler than the Iowest pohTt
on the bin.
Accessing Ice and Reaching the
Power Switch on Dispenser Models
There are two types of ice storage bins on
dispenser models. One has a shelf aboxe
tile bin, the other does not.
Special note about dispenser models
without a shelf above the ice bin:
i_:These models have a tilt-out ice bin.
The bin can be tilted ()tit as shown ill
the illustrations, and it will hold itself
up while you take ice ()tit or turn the
icelnaker power switch on and off.
Be sure to put the bin back in place
befiwe closing the dooi:
To restore your ice level from an empty
s e, ste s
12 hom_ after the fiI_t batch of ice
has tidlen into the bin, disl)ense
3 to 4 cubes.
@ _Mter an additional 6 hems, dispense
3 to 4 cubes again.
Models with a shelf
above the ice bin
Toaccessice, pullthe binforward.
Toreach the power switch, pull the
shelf straight out Always be sure to
replace the shelf.
These steps will restore your ice level
ill the shortest ai//otint of tilne.
11
I
,,,><,,,,,,,,,,,,,,,,,,
ii!iiiiii_i_iiiiiiiiiiiii
w
g
N"
i
H
Loading ...
Loading ...
Loading ...