Loading ...
Loading ...
Loading ...
11
WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
Problem Possible Cause Remedies
Loss of
suction
power
Dirty Water Tank has picked
up maximum amount of dirty
water and has reached full line.
Empty Dirty Water Tank.
Brush Roll Nozzle is not latched
in place.
Turn power OFF / Unplug machine and re-install
Brush Roll Nozzle.
Tanks may not be seated
properly.
Turn power OFF / Remove both tanks and
reseat them so they fit properly on the machine.
Reduced
spray OR
no spray
Clean Water Tank is empty. Refill tank.
Clean Water Tank isn’t seated
completely.
Turn power OFF / Remove and reseat tank.
System isn’t completely
primed.
Hold Spray Trigger for 10 to 15 seconds to make
sure the solution has flowed to the spray tips.
Brush Roll Nozzle isn’t latched
in place.
Turn power OFF / Unplug machine and re-install
Brush Roll Nozzle.
Not holding trigger to spray
solution.
Hold trigger continuously while using the
machine.
Machine
shuts OFF
unexpectedly
Circuit breaker may have
tripped due to Brush Roll
blockage.
Unplug machine from outlet. Check to see if
foreign object is caught in Brush Roll. Remove
object and make sure Brush Roll spins freely.
Plug machine back into outlet. Do not step on
or apply pressure to Brush Roll Nozzle while
operating machine.
Troubleshooting
For additional support, visit BISSELL.com.
Other maintenance or service not included in the manual should be performed by an authorized service representative.
Loading ...