Loading ...
Loading ...
Loading ...
For best results, it is important to periodically check and care for the filters and spray arms.
WARNING : To prevent any possible injury during care and maintenance / cleaning, be sure to wear
gloves or protective clothing.
Cleaning metallic parts
With a cloth or sponge, you can clean some parts
such as exterior or interior parts.
Stainless steel tub has a tendency to build up cloudy
film on its surface especially when using hard water.
Cleaning Spray Arms
- Lower Spray Arm
° Check that the water jet holes are not blocked by
food particles.
• When cleaning is necessary, remove the Spray arm
by pulling up.
• Clean the spray arm and replace it by pushing down.
- Upper Spray Arm
• Pull the upper rack forward. Make sure the water
jet holes are not blocked by food particles.
• When cleaning is necessary, remove the arm by
unscrewing the nut.
• Clean the spray arm and replace it in the reverse
order. Make sure the nut is tight!
- Top Spray Arm
• Make sure the water jet holes are not blocked by
food particles.
° When cleaning is necessary, remove the arm by
disassembling the hook from the bracket which
holds the Top Spray Arm assembly to the tub.
• Clean the spray arm and replace it.
Maintenance by seasons
- To prevent possible problems, be sure to follow
procedures below.
- During the summer season tf you are absent for
extended periods of time, it is recommended that you
close the water valve and unplug power cord.
- During the winter season, ifroom temperature where
dishwasher is located is exposed to freezing, it is
recommended that you winterize the water supply
lines and product itself.
]5
i _ iii
Loading ...
Loading ...
Loading ...