Loading ...
Loading ...
Loading ...
important Safety instructions
iMPORTANT iNSTRUCTiONS FOR
CLEANING YOUR RANGE
= Clean the range regularly to keep all parts free of
grease that could catch fire. Exhaust fan ventilation
hoods and grease filters should be kept clean. Do not
allow grease to accumulate on hood or filter. Greasy
deposits in the fan could catch fire. When you are
flaming food under the hood, turn the fan on. Refer to
the hood manufacturer's instructions for cleaning.
SELF CLEANING OVENS
• in the self-Cleaning cycle only clean the parts listed
in this Use and Care Guide. Before self cleaning the
oven, remove the broiler pan and any utensils or foods from the
oven.
Do not use oven cleaners--No commercial oven cleaner or
oven liner protective coating of any kind should be used in or
around any part of the oven.
Do not clean door gasket--The door gasket is essential for a good
seal. Care should be taken not to rub, damage or move the gasket.
Remove oven racks. Oven racks color will change if left in the
oven during a self-cleaning cycle.
The health of some birds is extremely sensitive
to the fumes given off during the self-cleaning cycle of the
range. Move the birds to another well ventilated room.
important Safety Notice
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of
substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn
customers of potential exposure to such substances.
Grounding Instructions
For personal safety, the cooktop must be properly grounded. For maximum
safety, the power cord must be plugged into an electrical outlet that is
correctly polarized and properly grounded.
DO NOT operate the cooktop using a 2-prong adapter or an extension cord.
If a 2-prong wall receptacle is the only available outlet, it is the personal
responsibility of the consumer to have it replaced with a properly grounded 3-
prong wall receptacle installed by a qualified electrician.
See the iNSTALLATiON iNSTRUCTiONS packaged with this cooktop for
complete installation and grounding instructions.
This appliance is equipped with a 3-prong grounding plug
foryour protection against shock hazard and should be plugged directly into
a properly grounded receptacle. DO NOT cut or remove the grounding prong
from this plug.
Personal injury or death from electrical shock may occur
if the range is not installed by a qualified installer or electrician.
Grounding
type wall
receptacle
Do not, under any
circumstances,
cut, remove, or
bypass the
grounding prong.
Power supply cord with
3-prong grounding plug
Avoid fire hazard or electrical
shock. DO NOT use an adapter plug, an
extension cord, or remove grounding prong
from electrical power cord. Failure to follow this
warning can cause serious injury, fire or death.
Conversion to Liquefied Petroleum Gas (or L. P. Gas)
This natural gas range is designed to allow for conversion to Liquefied Petroleum (L. P.) Gas.
Only a qualified service agent should perform the L. P. conversion. Contact the local gas provider for conversion. A L. P.
Conversion Kit is supplied with this range and is located on the main back of the range. The kit contains installation
instructions which must be read before and followed carefully when installing the kit.
To avoid serious injury, any additions, changes or conversions required in order for this appliance to
satisfactorily meet the application needs must be made by a qualified service agent.
Product Record
in this space below, record the date of
purchase, model and serial number of your
product. You will find the model and serial
number printed on the serial plate.
Model No. 790.79613
Serial No.
Date of purchase
Save these instructions and your sales
receipt for future reference.
Serial Plate Location
You will find the model and serial number
printed on the serial plate.
Remember to record the serial number
for future reference.
Serial Plate Location
A serial plate is located
on the lower trim and
visible when the oven
door is opened.
5
Serial Plate Location
A serial plate is located
at the back of the unit.
_t
JfJ
Loading ...
Loading ...
Loading ...