Craftsman 917276393 tractor

User Manual - Page 9

For 917276393.

PDF File Manual, 64 pages, Download pdf file

Loading ...
Loading ...
Loading ...
6. Lowerseat into operatingpositionand
sit in seat.
7. Slideseat untila comfortableposition
is reachedwhichallowsyou to press
clutch/brakepedal all theway down,
8, Get off seatwithoutmovingitsad-
justed position.
9. Raise seat and tighten adjustment
knob securely.
Seat
Bolt
Flat Washer
\.
Adjost /oo(Knob
CHECK BATTERY
1_ Lift seat pan to raised position.
NOTE: If this battery is put into service
after month and year indicated on label
(label located between terminals) charge
battery for minimum of one hour at 6-10
amps. (See "BATTERY" in Maintenance
section of this manual for charging instruc-
tions).
Seat
Label
Term
Terminal
NOTE: You may now roll or drive your
tractor off the skid. Follow the appropriate
instruction below to remove the tractor
from the skid.
WARNING: Before starting, read, un-
derstand and follow all instructions in the
Operation section of this manual. Be sure
tractor is in a well-ventilated area, Be sure
the area in front of tractor is clear of other
people and objects.
TO ROLL TRACTOR OFF SKID (See
Operation section for location and
function of controls)
1. Press lift lever plunger and raise
attachment lift lever to its highest po-
sition.
2o Release parking brake by depressing
clutch/brake pedal.
3. Place gearshift lever in neutral (N)
position.
4, Roll tractor forward off skid.
5. Remove banding holding the deflector
shield up against tractor,
TO DRIVE TRACTOR OFF SKID
(See Operation section for location
and function of controls)
1o Be sure all the above assembly steps
have been completed.
2. Check engine oil level and fill fuel tank
with gasoline.
3. Sit on seat in operating position,
depress clutch/brake pedal and set the
parking brake.
4. Place gear shift lever in neutral (N)
position.
5. Press lift lever plunger and raise
attachment lift lever to its highest posi-
tion.
6. Remove key from bag and start the
engine (see "TO START ENGINE" in
the Operation section of this manual),
After engine has started, move throttle
control to idle (slow) position.
7. Depress clutch/brake pedal into full
"BRAKE" position and holdo Move
gearshift lever to 1st gear,
8. Slowly release clutch/brake pedal and
slowly drive tractor off skid.
9. Apply brake to stop tractor, set park-
ing brake and place gearshift lever in
neutral position.
1&Turn ignition key to "STOP" position.
Continue with the instructions that follow.
9
Loading ...
Loading ...
Loading ...