1.Head Cover
2.Mist Outlet
3.Water Filling Nozzle
4.Water Tank
5.Steam Hood
6.Outlet Valve
7.Atomizing Plate
8.Float Ball
11.Anti-scale Plate
10.PTC Heater
9.Aromatherapy Box
< Remote Controller >
< Display panel >
Temperature
Mist level
Humidity
Function Icons
< Operation panel >
Timer
Please do not use the humidier until all parts have been assembled properly, otherwise it may cause
malfunction or deformation.
AC 120V,60Hz
Do not place your hand close to mist nozzle when operate the device in a heating
mode to avoid being scalded.
Do not place your hand in the tank when operating the device in heating mode or
soon after use to avoid being scalded.
Water level icon
When there is less water in the tank or if it runs out of water, the left
icon will blink and it will automatically enter standby mode. Please ll
water in time.
Auto mode
Mist level
Low
Mid
High
Humidity
● Please do not add essential oil directly to the water tank as it may
lead to deformation, breakage, or water leakage.
● If the essential oil adheres to the main unit or the aroma tray,
immediately rinse or wipe it o.
● When pulling out the aroma box, be careful not to spill the
essential oil on the main unit.
● When moving the main unit, be careful not to drop the aroma box.
● Do not use synthetic fragrances other than 100% natural essential
oil.
● Never use chemical products on the atomizing plate since that will
diminish performance.
● If you do not clean the atomizing plate regularly, mineral crystals
will stick to it and are hard to clean.
