Loading ...
Loading ...
Loading ...
Automatic Ice and Water Dispenser
)o notusetheicechuteas ahandlewhen
removingorreplacingtheicestoragebin.
Surfacesthere may be sharp,
\
\
Do not put fingers up ice chute. Surfaces
there may be sharp. •
CLEANING THE ICE DISPENSER
Clean the dispenser and ice container at regular intervals, particularly
before you take a vacation or move, or ifthe ice dispenser sticks.
1. Stop ice production by lifting the wire signal arm to the "up" or OFF
position.
2. Remove icecontainer by lifting up and out. Empty and carefully clean
the container with mild detergent. Rinse with clear water. Do not use
harsh or abrasive cleaners. Allow icecontainer todry completely before
replacing in the freezer.
3. Remove ice chips and clean the shelf and chute that supports the ice
container.
4. Replace the ice container. Lower the wire signal arm on the ice
maker to the "down" or ON position and the ice maker will resume
production.
Auger-
IMPORTANT: When removing or replacing the ice bin. do not
rotate the auger in the ice bin. If the auger is accidentally turned.
you must realign the auger by turning itin90 °turns untilthe ice bin
fits intoplace with the drive mechanism.
Remove and empty the ice storage bin if:
1. An extended power failure _onenour or longer) causes ice cubes in
the ice storage bin to melt and freeze together and jam the dispenser
mecnanism.
2. The ice dispenser is not used frequently Ice cubes will freeze together
in the bin and ,am the dispenser mechanism. Remove the ice storage
bin and snake to loosen the cubes.
NEVER use an ice pick or similar sharp instrument to break up the ice.
This could damage the ice storage bin and dispenser mechanism.
14
Loading ...
Loading ...
Loading ...