Loading ...
Loading ...
Loading ...
V
I
N
O
T
E
M
P
.
C
O
M
OPERATING YOUR BEVERAGE COOLER
The appliance should be placed where the ambient temperature is between 32°F to 91°F. If the
ambient temperature is above or below this range, the performance of the unit may be affected.
For example, placing your unit in extreme cold or hot conditions may cause interior temperatures
to fluctuate.
Connect power cord to a properly grounded outlet.
This appliance is equipped with Memory IC – should there be a power interruption, unit will auto
recover at last setting.
Control Panel:
ON/OFF Power
To turn the appliance on or off, press and hold the ON/OFF button for 3 seconds.
Setting the temperature Control
Adjustable temperature: 5℃ to 20℃
Set the desired temperature by pressing the corresponding buttons, to increase or to
decrease. Each press is in 1-degree increment. Once released, set temperature will flash for
approximately 5 seconds then revert back to display the internal temperature.
To view your set temperature, press either the or button once and LED display will flash
set temperature for 5 seconds.
The appliance has the capability to display temperature in either Celsius or Fahrenheit. To change
the temperature scale, press and hold both buttons simultaneously for approximately 3
seconds.
Note: The temperature of cans inside may vary slightly depending on whether or not the interior bulb is
ON or OFF and where the bottles are located (upper/middle or lower section).
RUN
When unit’s compressor is running, this indicator light will illuminate to signify that cooling mode is
currently in operation.
W
11
17621
South Susana Road, Rancho Dominguez, California 90221
info@vinotemp.com
Loading ...
Loading ...
Loading ...