Greenworks 1310802AZ 40V 14" Lawn Mower, Axial Blower, & 12" String Trimmer Combo Kit w4Ah USB Battery & Charger

User Manual - Page 11

For 1310802AZ.

PDF File Manual, 48 pages, Read Online | Download pdf file

1310802AZ photo
Loading ...
Loading ...
Loading ...
8.3 EMPTY THE GRASS CATCHER
1. Stop the machine.
2. Remove the battery pack.
3. Open the rear discharge door and hold it.
4. Hold the grass catcher by its handle and unhook it from
the slots.
5. Close the rear discharge door.
6. Empty the grass catcher.
8.4 OPERATE ON SLOPES
WARNING
Do not mow on the slopes with incline more than 15°. If
you are not comfortable, do not mow on a slope.
Do not go up and down on a slope, mow across the face
of the slope. Be careful when you change the direction on
a slope.
Monitor the holes, ruts, rocks, and other hidden objects
that can cause you to fall. Remove all obstacles such as
rocks and tree limbs.
Make sure that your footing is stable. If you are out of
balance, release the switch box handle immediately.
Do not mow near drop-offs, ditches, or embankments.
8.5 OPERATION TIPS
Do not try to override the operation of the start button or
bail switch.
Do not tilt the machine when you start it.
Do not put hands or feet near or below the turning parts.
Keep the discharge chute clean.
Do not cut wet grass.
Higher blade height is necessary for new or thick grass.
Clean the bottom of the mower deck after each use.
Remove grass clippings, leaves, dirt, and other debris.
9 MAINTENANCE
WARNING
Remove the safety key and battery pack from the machine
before maintenance.
WARNING
Keep the motor and battery pack free from grass, leaves or
too much grease.
CAUTION
Use only approved replacement parts.
CAUTION
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
9.1 GENERAL MAINTENANCE
Before each use, examine the machine for damaged,
missing, or loose parts such as screws, nuts, bolts and
caps.
Tighten correctly all the fasteners and caps.
Clean the machine with a dry cloth. Do not use water.
11
English
EN
Loading ...
Loading ...
Loading ...