Loading ...
Loading ...
Loading ...
User instructions
21
3.2 Washing programs
Before starting a washing program make sure that:
The water supply tap is open.
The softener container contains regenerating salt.
The correct amount of detergent has been added to the
dispenser.
The baskets have been correctly loaded.
The spray arms are able to rotate freely and without
obstruction.
The dishwasher door is securely closed.
Warning:
during the initial phase of the washing program, the operation of sprayers
is not perceived because they start rotating about 5 minutes after the start.
This is the normal operation of the washing cycle.
3.3 Switching on
Press the on/off button to start the dishwasher. Then wait for one of the
program indicator light to turn on.
IMPORTANT
The door of the dishwasher must ble closed within 4 seconds after use
of the program selection button for all functions (e.g. program selection,
change, delection, etc.). If the door is not closed within 4 seconds, one or
more program lights (depending on the current opertaion) will flash at
high speed to indicate that the operation must be confirmed before the
door is closed.
To confirm, simply press the program selection button once and the
flashes will slow down; close the door an once to start/restart the
dishwasher.
The same applies if the dishwasher is opened with the program delay
option set and the cycle not started (e.g. to add more dishes): the
program selection button must be pressed before the door is closed,
restarting the program delay countdown.
If the door of the diishwashehas not been closed or has been incorrectly
closed, the washing cycle will not begin.
Loading ...
Loading ...
Loading ...