Loading ...
Loading ...
Loading ...
GENERAL
I Z_ WARN ING: T° av°id accidents' ALWAYSdisc°nnect thet°°l fr°m the 1
power source BEFORE cleaning or performing any maintenance°
/_, WARNING: When servicing a tool, ALWAYSuse only identical
replacement parts, Use ofany other parts may createa risk ofelectric shock or
injury and cause product damage.
All parts represent an important part of the double insulation system and should be
serviced only at a Sears Service Center.
Avoid using solvents when cleaning plastic parts° Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, carbon dust, etco
WARNING: DO NOT at anytimeletbrakefluids, gasoline,petroleum-based
products, penetrating oils, etc.tocome incontact with plastic parts.They contain
chemicals that can damage, weaken or destroy plastic.Use clean clothsto remove
dirt, carbon dust, etco
Itisa known fact that electric toolsare subject to acceleratedwear and possible
premature failure when they are used to work on fiber glass,
wallboard, spackling compounds or piaster.The chips and grindings from these
materials are highly abrasive to electrical toolparts, such as bearings, brushes,
commutators, etc Consequently, it is not recommended that this tool be used for
extended work on any fiber glass material, wallboard, spackling compound, or
plaster. During any use on these materials, itis extremely important that the toolis
cleaned frequently by [blowing with an air jet.
EXTENSION CORDS
The use of any extension cord will cause some tossof power. To keep theloss at a
minimum and to prevent overheating, use an extension cord that is heavy enough to
carry the current that the tool will draw°
A wire gauge (_,;WG)of at least 16 isrecommended for an extensioncord 100 feet
or less in length. When working outdoors ALWAYS use an extension cord that is
suitable for outdoor use.The cord's jacket will be marked WAo
i = L
I Z_ CAUTION: Keepextension cords away from thecutting area, and position
I the cord so itwill not get caught on lumber, tools, etc. during the cutting operation_
WARNING: Check extension cords before each use. If damaged, replace
it immediately_NEVER use a toolwith a damaged cord because touching the
damaged area could cause electrical shock, resulting in serious injury
= =
16
Loading ...
Loading ...
Loading ...