Loading ...
Loading ...
Loading ...
25
1
1
1
2
2
Reattach door to range.
Open door completely. Fold latches forward until
locked in place.
3
Close door.
24
1
2
Burner heads and bases are packed in cardboard top pack with
the grates. Place burner bases on top of the burner flanges and
burner heads on top of the burner base. Place burner grate on
top of grate support.
3/8”3
/
8
”
(0.95 cm)(
0
.
9
5
c
m
)
3/8”
(0.95 cm)
3
Check that unit is level side to side
and front to back. The side trim must be 3/8” (0.95 cm)
above countertop. If unit is not level repeat Steps 5-7
of “Leveling/Adjustments/Alignment” section.
Slide range into place. Be sure
wall anit-tip bracket slides into the anit-tip opening
and floor anti-tip hook and bracket are engaged.
Final Installation
DANGER
FIRE HAZARD
Backguards come standard with
standoff spacers which provide a barrier
between back of range and rear wall.
These must be in place for adequate
ventilation. Standoff spacers can only be
removed if range is installed against a
Non-Combustible wall.
Door Replacement
Standoff Spacer Removal
Installation
Installation
1a
Loading ...