Loading ...
Loading ...
Loading ...
CARE AND CLEANING
Proper care and cleaning are important so your range
will give you efficient and satisfactory service. Follow
these directions carefully in caring for your range to
assure safe and proper maintenance.
BE SURE ELECTRICAL POWER IS
OFF BEFORE CLEANING ANY PARI' OF
THE RANGE.
Burner Cap
_ Burner Head
I
Mixing Tube _ jSpark Igniter
_ Burner Bowl
Burner Assembly
The burner assemblies should be washed regularly
and, of course, alter spiilovers.
Turn all controls off before removing bumer parts.
The electrode of the spark igniter is exposed
beyond the surface of the burner bowl. When
cleaning the burner bowl, be careful not to snag
the electrode of the spark igniter with your
cleaning cloth. Damage to the igniter could
occur. Be careful not to push in any cooktop
controls while cleaning the burner bowls. A slight
electrical shock might result which could cause
you to knock over hot cookware.
The burner grates, burner heads and burner caps can
be removed for easy cleaning. Removing them gives
you access to the burner bowls. (To avoid snagging a
cloth on the spark igniter, leave the burner heads in
place when cleaning the burner bowls. Wash burner
parts with an all-purpose non-abrasive cleaner and
warm water. Soak stubborn soil. Dry them with a
cloth-do not reassemble while wet. If the igniter
orifice gets dirty or clogged you may use a small
sewing needle to remove the soil.
To reassemble, replace the burner head Iirst, then the
burner cap and lastthe burner grate.
I
CAUTION: DO NOT OPERATE THE BURNER I
WITHOUT ALL BURNER PARTS IN PLACE.
I
3O
Loading ...
Loading ...
Loading ...