Loading ...
Loading ...
Loading ...
9. At thistime, makesureall gas,exhaustandelectricalconnectionsarecomplete. Plug
dryer in, andcheckoperationby usingthechecklistbelow.
10. (GASMODELS ONLY) - Theburnermaynotigniteinitially dueto air in the gaslille.
Allowing thedryer to operateon aheatsettingwitl purgetheline. If thegasdoesnot ignite
within five minutes,turn tile dryer off andwait 5 minutes. Besurethegassupplyto the
dryerhasbeenturnedon. In order to confirm gasignition,checktheexhaustfor heat.
F_AL INSTALLATION CHECK LIST
- Dryer is plugged into electrical outlet and is properly grounded.
- Exhaust ductwork is hooked up and joints taped,
- Plastic flexible duct is NOT used.
- Use only rigid or stiff wailed flexible metal vent materia!.
- Dryer is level with at1 legs fixmly on the floor, with the lock nuts tightened.
- Vinyl feet have been installed.
- Gas Models - Gas is turned on, there are no gas leaks.
- Dryer runs.
- Dryer heats.
- Dryer shuts off.
- Demonstrate use to customer.
PARTS AND LITERATURE ARE PACKAGED INSIDE
OF DRYER DRUM