Loading ...
Loading ...
Loading ...
Adjusting the equalizer
1
Select “EQ”.
2
Adjust the “Treble” or “Bass” up or down.
0
Select the Reset button to restore the default settings.
NOTE
0
The equalizer function is disabled for the COAXIAL OUT terminal and OPTICAL
OUT terminal.
Adjusting the audio quality
Selects the transcoding option for rebroadcasting audio from one HEOS
device to another HEOS device (or group of devices) across the network.
When set to high bit rate audio sources originating from the first device
(such as Analog input, WAV, FLAC and PCM) will be transcoded to
ensure the highest level of reliability for the audio stream. (v
p. 23)
1
Select “Quality”.
2
Select “Normal” (default) or “High”.
0
If you have selected “High” and you experience audio dropouts when streaming
sources from one device to other devices, please select “Normal” (default).
Adjusting the line out
1
Select “Line Out Level”.
2
Select Fixed to lock the volume at the optimal level or
select Variable (Analog Output Only) to control the
volume from the Now Playing screen.
0
If you enable the IP control, “Line Out Level” will be disappeared and forced to
change.
NOTE
0
The Line Out Level is disabled for the COAXIAL OUT terminal and OPTICAL OUT
terminal.
Adjusting the status light brightness
1
Select “Status Light”.
2
Adjust the brightness up or down or set the slider to
the OFF position to completely disable the status light.
Contents Setup Use Troubleshooting Status LED Appendix
39
Loading ...
Loading ...
Loading ...