Loading ...
Loading ...
Loading ...
REMOTE CONTROL OPERATING iNSTRUCTiONS
iiiiiiiil
NOTE: Heat mode is not avai
on the SG=PAC=08E3
DISPLAY and
MODE LABELS
POWER
1)
2)
3)
4)
5)
FAN BUTTON--
SLEEP BUTTON-- --
(Not Available on SG-PAC=08E3)
" TIMER BUTTON
Power On and Off - Press the ON/OFF (POWER) button once to manually turn the unit on. Press the Power button once
more to turn the unit off. When you manually power the unit on and offby pressing the ON/OFF button, the preset timer will
be cancelled.
Mode Selection - Press the MODE Button repeatedly to cycle between the differem modes: Auto, Air Conditioner, Dehu-
midifier, and Fan only mode. Once a mode is selected, an arrow will light up on the LCD display next to the selected MODE
label on the remote. Auto mode automatically chooses the air conditioner, dehumidifier, or fan mode based on the current morn
temperature.
_- Press the FAN speed button to cycle through low, medium, and high :fan speeds. The small fan icons will light up
depending on which speed is selected. The more fan icons light up, the Ngher the speed. The fan icons are located on the LCD
display- next to the SPEED label.
Tern erature Settin - When the unit is in Air Conditioner mode you can select your desired temperature. Press the TEMP
SELECT bultons (+ or -) to select your desired temperature selling. The temperature on the LCD display on the remote control
will increase or decrease accordingly. Hold the +/- buttons for two seconds to rapidly increase or decrease the temperature.
Auto-on Timer: When the air conditioner is off, it can be set to automatically turn on in 30 minutes to 24 hours at the previous
set mode and fan setting. To set the Auto-on Timer, press the TIMER button on the unit or remote control. Each touch of the +/-
buttons on the remote wilt change the timer setting in 30 minute increments (.5 hours). The T-ON and H lights will blink while
the Auto=on Timer is being set. Once the timer is set, press the TIMER button once more to save the setting. Press the TIMER
one time, LED display remaining set time for 2 seconds then back to former display; Press TIMER twice within 2 seconds to
cancel the timer;
Auto-off Timer: When the air conditioner is on, it can be set to automatically turn off in 30 minuts to 24 hours. To set the Auto
-off Timer, press the TIMER button on the remote control. Each touch of the +/- buttons on the remote will change the timcr
setting in 30 minute (.5 horn') intervals. The T-OFF and It lights will blink while setting. To cancel the timer, press the ON/
OFF button. Once the timer is set, press the TIMER button once more to save the setting. Press the TIMER one time, LED
display remaining set time for 2 seconds then back to former display; Press TIMER twice within 2 seconds to cancel the timer;
Loading ...
Loading ...
Loading ...