Loading ...
Loading ...
Loading ...
11ninjakitchen. co.uk
10 ninjakitchen.uk
6a Plug in the unit, then press the Power
button to turn it on. If using an
Auto-iQ® program, first select the
program that best suits your recipe.
The preset feature will automatically
stop the unit at the end of the program.
To stop the unit at any time, press the
currently active program again.
6b If not using an Auto-iQ® program, select
one of the manual programs. Once the
ingredients have reached your desired
consistency, press the active button
again, and wait for the unit to come to a
complete stop.
7
When finished, press the button on the
feed chute lid near the handle to unlock,
then turn the lid anti-clockwise. Lift
the lid from the bowl. Always remove
the Chopping Blade Assembly before
emptying the ingredients from the
bowl. To remove the Chopping Blade
Assembly, carefully grasp it by the top
of the shaft and lift it out of the bowl.
8 To remove the bowl from the motor
base, turn the bowl anti-clockwise and
then lift it.
9 Press the Power button to turn the unit
o, then unplug the unit. Refer to the
Care & Maintenance section for cleaning
and storage instructions.
USING THE SLICING/GRATING DISC
IMPORTANT: Use the SLICE or LOW
setting when using the Slicing/
Grating Disc.
IMPORTANT: Review all warnings on
pages 4–6 before proceeding.
USING THE FOOD PROCESSOR BOWL - CON’T
3 Place the disc adapter onto the drive
gear inside the bowl. Then, use the
finger holes to grasp the reversible
slicing/grating disc and place it over the
adapter, with the side you would like to
use facing up.
4 Place the feed chute lid on the bowl and
turn clockwise until you hear a click,
indicating the lid is locked in place. The
control panel will stop flashing, indicating
the bowl and lid are properly assembled.
IMPORTANT: If the control panel is
flashing, this means the lid is not
locked in place correctly. Review the
steps 2-4 to ensure you are installing
the disc adapter, ingredients, disc and
lid correctly.
NOTE: The feed chute lid features
a pusher to guide food through the
chute.
NOTE: The Slicing/Grating Disc
is reversible. Use the side labeled
“Slicer” for slicing. Carefully flip
the disc over to the side labeled
“Shredder” for grating.
1 Place motor base on a clean, dry, level
surface such as a countertop or table,
then plug in the unit.
2 Lower the Food Processor Bowl onto
the motor base and rotate clockwise
until it clicks into place.
Loading ...
Loading ...
Loading ...