Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/67519353-cpk1261-orb/bg11.png)
17
TROUBLESHOOTING
6. Blade holders are loose. 6. Check to be sure the fan blade irons seat firmly and
uniformly on the surface of the motor. If flanges are
seated incorrectly, loosen the flange screws and
retighten.
7. Blade out of balance. 7. Interchange two adjacent blades; this will redistribute
the weight and possibly result in smoother operation.
8. Fan too clos
e to vaulted ceiling. 8. Lower or move fan. Extension downrods may be
ordered.
9. Transition to different speed. 9. When switching from medium to low speed, you may
notice some fan wobble in the fan. When the fan
stabilizes at low speed, wobble should disappear.
10. Fan not securely mounted. 10. Make sure canopy and mounting bracket are
tightened securely to ceiling joist.
1. Power turned off, fuse blown or
circuit
breaker tripped
.
1. Turn power on, replace fuse or reset breaker.
3. Motor reversing switch not engaged. 3. Push switch firmly right or left. Fan will not operate
when switch is in the middle.
4. Pull chain switch not "on". 4. Pull switch chain.
1. Wrong wire connection. 1a. Refer to Step 1, page 10 to ensure all wire
connections were done correctly.
2. Bulb is burned out. 2b. Replace the bulbs.
Fan d
oes not start
2b. Check the plug connection in the switch housing.
2a. Turn power off and loosen canopy; check all
connections according to section WIRING
INSTRUCTIONS on page 10.
2. Loose wire connections or wrong
connections.
Light does not work
Fan wobbles
PROBLEM PROBABLE CAUSE CORRECTIVE ACTION
Loading ...
Loading ...
Loading ...