Unique UGP24VPC1W INSTALLATION AND OWNER’S MANUAL

Loading ...

OPERATION OF RANGE

(continued)

3. Press the knob inward and

hold to activate the electronic

ignition. Note that you will

hear a “clicking” noise. Hold

the knob pressed inward until

the oven burner is lit. Once

the oven burner is lit, release

the knob.

In case of power outage, you can manually light the burner by pressing the knob

inward and immediately approach a lighted match to the opening “A” (see the dia-

gram above).

Never continue this operation for more than 15 seconds. If the

burner has still not ignited, wait for about 1 minute prior to

repeating the ignition.

4.Whenusingtherangeforthersttimeorafterlongperiodofnon-usage,keep

pressing the knob inward for approximately 10 – 15 seconds after the burner has lit

to ensure the gas valve has been accurately primed.

5. Close the oven door slowly and adjust the burner accordingly to the desired

temperature.Iftheameextinguishesforanyreason,thesafetyvalvewillauto-

matically shut off the gas supply to the burner.

Tore-lighttheburner,rstturntheovencontrolknobtotheOFFposition,waitfor

at least 1 minute and then repeat the lighting procedure.

Attention: the oven door becomes very hot during operation. Keep

children away.

MOISTURE IMPORTANT

If sparking does not occur when the oven thermostat knob is turned on during the

initialattempttouse,orafterseveraldaysofnon-use,itCOULDBEtheresultof

moisture build-up in the ceramic sleeve of the oven electrode. This may happen in

areas with high humidity, or if food having high water content is cooked. This mois-

ture can be driven out of the ignitor by lighting the pilot and operating the oven for

a few minutes.



Loading ...

Unique UGP24VPC1W Prestige Series 24 Inch Gas Freestanding Range