Maytag MDG7600AWW Atlantis Gas Dryer

User's Guide - Page 9

For MDG7600AWW.

PDF File Manual, 12 pages, Read Online | Download pdf file

MDG7600AWW photo
Loading ...
Loading ...
Loading ...
CAREAHi)CEAHIHG
Control Panel - cleanwith a soft, damp
cloth.Do not useabrasive substances.
Tumbler - remove any stains such as
crayon, ink pen or fabric dye (from new
items such as towels or jeans) with an
all-purpose cleaner. Then tumble old
towels or rags to remove any excess
stain or cleaning substance.Once these
stepsare done,stainsmaystill be visible,
but should not transfer to subsequent
loads.
Cabinet - wipe off any marks with soap
and water.
Dryer Exhaust System - should be
inspected and cleaned once a year to
maintain oplimum performance.Theout-
side exhaust hood should be cleaned
more frequentlyto ensure proper opera-
tion. (Refertothe Installation Instructions
for more information.)
REPLA(IH6TttEDRUMLIGHT
Instructionsfor replacingthe bulb:
1) Unplugor disconnect the dryer from
the electricalpower supply.
2) Open the door and use a Phillips
screwdriver to remove the screw
attaching the lens to the tumbler
front.
3) Remove lens cover by pulling cover
toward center of tumbler.
4)
5)
6)
Rotate bulb counter-clockwise to
removefrom socket.
Replace the bulb with a 120 volt, 10
watt maximum candelabra base light
bulb.
Turn the light bulb clockwise into
socket.
7) Replacelenscover byhookingplastic
tabs into tumblerfront below the light
housing.
8) Reinstallthescrewintothe lenscover
screwhole.
9) Reconnect dryerto powersupply.
REVERSIHGTHEDOOR
Directionsfor reversingthe dryer door:
1) Remove the hinge hole covers and
screws.
2) While supporting the door, remove 2
screws in the hinges that secure the
hingesto the cabinet.
3) Removedoor by lifting slightly at the
hingesand pulling the hinge tabs out
of the hinge slots.
4)
S)
Move thefollowing parts to the oppo-
site side of the door: 2 hinges and 4
hinge screws, 4 door screws, door
strike and screw, inner door cover
plate and screw.
Attach the door to the opposite side
of the cabinet using the 2 counter
sunk hinge screws. (See below).
Door Catch
\
Screw the lower hinge screw in first.
This will help to align the door and
hinges.
6) Replace the hinge hole coversto the
opposite side.
Counter Sunk Screw "'_, '_
.,_ Door
\Screws
Door
JJ Strike
8
Loading ...
Loading ...
Loading ...