Loading ...
Loading ...
Loading ...
4
PARTS
1. Temperature control
2. Steam pipe
3. Water tank release button
4. Steam trigger
5. Thermostat light
6. Hose clip
7. Control panel
8. On/o switch
9. Low water light
10. Anti-scale cartridge warning light/reset button
11. Reservoir
12. Plug storage socket
13. Cover
14. Anti-scale cartridge
BEFORE FIRST USE
• Remove any labels, stickers or packaging from the iron and soleplate.
• Before using the iron for the rst time, or if it’s not been used for a long time, iron a scrap piece of
cotton (an old towel is ideal) to remove any accumulated residues.
• Don’t worry if the iron smokes a bit at rst, it will soon stop as the manufacturing residues evaporate.
AUTO SHUTOFF
If you don’t press the steam trigger for 10 minutes your iron’s auto shut-o feature will operate. The
thermostat light will ash to tell you that it is in auto shut-o mode. To cancel the auto shut-o mode, press
the steam trigger. Note that your iron will need time to heat up again to the selected temperature. Wait
until the temperature light has stopped ashing before resuming ironing.
FILLING/REFILLING
• Don’t add anything to the water and don’t use water with anything added to it. When the water is
converted to steam, chemicals, perfume, and other additives will coat the inside of the steam
chamber, shortening the life of the iron.
1. Press the water tank release button and pull the water reservoir away from the body of the steam
generator (g. A).
2. Fill the reservoir to the max mark. Do not exceed the max mark.
3. Ret the reservoir into the base unit pushing it in until it clicks.
• A warning light (d)will come on when the reservoir needs relling. If the reservoir is empty, you can
still use your iron but without steam.
PRELIMINARY SETTINGS
1. Put the iron on top of the base unit.
2. Put the plug into the power socket (switch the socket on, if it’s switchable).
3. Turn the unit on by setting the on/o switch to I.
4. Turn the temperature control to bring the setting you require next to the mark. The thermostat light will
ash until the iron has reached its desired temperature. Once the temperature has been reached the
light will remain on.
TEMPERATURE SELECTION GUIDE
1. Check for textile care symbols (i j k l)..
2. Iron fabrics needing low temperatures rst, then those that need medium temperatures , and nish
with those needing high temperatures (or max).
3. Turn the temperature control to bring the setting you require next to the mark.
Loading ...
Loading ...
Loading ...