Loading ...
Loading ...
Loading ...
MOBILE HOME INSTALLATION
1. Dryer MUSTbe exhausted outside (outdoors, not beneath
the mobile home) using metal ducting that will not support
combustion. Metal ducting must be 4 inches (I0.16 cm) in
diameter with no obstructions. Rigid metal duct ispreferred.
2. If dryer is exhausted through the floor and area beneath
the mobile home is enclosed, the exhaust system MUST
terminate outside the enclosure with the termination
securelyfastened to the mobile home structure.
3. When installing agasdryer into a mobile home, a provision
must be made for outside make up air. This provision isto
be not lessthan twice the area of the dryer exhaust outlet.
4. This dryer MUST be fastened to the floor. Mobile Home
Installation Kit No. 169840 isavailable from your dealer.
5. Refer to pages 2 and 3 for other important venting
requirements.
6. Installation MUSTconform to current Manufactured Home
Construction & Safety Standard (which is a Federal
Regulation Title 24 CFR-Part32-80) or when such standard
is not applicable, with American National Standard for
Mobile Horses. In Canada, tile CSA Z240 is applicable.
The dryer isdesigned under ANS! Z 21.5.1 for
HOME USEonly.
L
Correct
Correct
L
Incorrect
DoN
©
Incorrect
Correct
L
L
Incorrect
L
UNDER COUNTER & STACK MODELS
ROUGHqN DIMENSIONS
I 26 7/8' t
(58.3 cm)
T
33/4"
(9.5 cm)
B'ELECTRtC CONNECTION
13 1/2" -_
(34.4 cm) l
©
_/8" (&95 cm) DIA.
GAS PIPE
UNDER
COUNTER
34 5/8"
(87.9 cm)
t" (2.54cm)
REAR VIEW
DOOR OPEN 90°
47 1/2"
(120.7 cm)
4 3/8"
(11.1 cm) _
OPTIONAL
VENT KNOCKOUT_-_
27"
(68.6cm)
SIDE VIEW
3 3/4"
(9.5 cm)
Loading ...
Loading ...
Loading ...