Loading ...
Loading ...
Loading ...
NOTE:Notallbulbswillfityourrefrigerator.Besuretoreplace
thebulbwithoneofthesamesize,shapeandwattage.
1. Unplugrefrigeratorordisconnectpower.
2. UsingaPhillipsscrewdriver,removethefourscrewsthat
securethelightshield.
A
A. Screws
3. Replace the light bulb with an appliance bulb of the same
wattage.
4. Using a Phillips screwdriver and the four screws, reattach the
light shield.
5. Plug in refrigerator or reconnect power.
Vacations
If you choose to leave the refrigerator on while you're away, use
up any perishables and freeze other items.
If you choose to turn the refrigerator off before you leave, follow
these steps.
1. Remove all food from the refrigerator.
2. Turn the refrigerator control to the off position. See "Using the
Control."
3. Unplug the refrigerator.
4. Clean the refrigerator. See "Cleaning."
5. Tape a rubber or wood block to the top of the door to prop it
open far enough for air to get in. This stops odor and mold
from building up.
Moving
When you are moving your refrigerator to a new home, follow
these steps to prepare it for the move.
1. Remove all food from the refrigerator.
2. Turn the refrigerator control to the off position. See "Using the
Control."
3. Unplug the refrigerator.
4. Clean, wipe, and dry it thoroughly.
5. Take out all removable parts, wrap them well, and tape them
together so they don't shift and rattle during the move.
6. Tape the doors shut and tape the power cord to the
refrigerator cabinet.
When you get to your new home, put everything back and refer to
the "Installation Instructions" section for preparation instructions.
Your refrigerator is equipped with a heater to keep it functioning
normally in temperatures as low as 15°F (-9°C). If the temperature
drops below 15°F (-9°C), remove all items from the refrigerator to
prevent them from freezing.
Loading ...
Loading ...
Loading ...