Loading ...
Loading ...
Loading ...
7
www.bromicheating.com
INSTALLATION REQUIREMENTS
IMPORTANT
Installation and repair should be done by a qualified service
person. The heater should be inspected before use and at
least annually by a qualified service person.
This appliance shall only be used in above ground open-air
situations with:
• natural ventilation
• without stagnant areas
• where gas leakage and products of combustion are
rapidly dispersed by wind and natural convection
Any enclosure in which the appliance is used shall comply
with one of the following:
1. An enclosure with walls on all sides, but at least one
permanent opening at ground level (ref. Appendix A,
Example 1)
2. Within a partial enclosure that includes an overhead
cover and no more than two walls (ref. Appendix A,
Example 2)
3. Within a partial enclosure that includes an overhead cover
and more than two walls, the following shall apply:
• At least 25% of the total wall area is completely open
(ref. Appendix A, Example 4), and
• At least 30% of the remaining wall area is open and
unrestricted (ref. Appendix A, Example 4)
Note: The definition of outdoors is an above ground open-
air situation with natural ventilation, without stagnant areas,
where gas leakage and products of combustion are rapidly
dispersed by wind and natural convection.
!
GAS REQUIREMENTS
TUNGSTEN Smart-Heat LPG Model:
• Use Propane (LPG) gas cylinder only
• The approved manifold pressure to the appliance is 10”
W.C.
• The MIN inlet pressure to the appliance is 11” W.C
• The MAX inlet pressure to the appliance is 14” W.C
IMPORTANT
• The LPG gas cylinder must be:
• Constructed and marked in accordance with the
Specifications for LP-gas cylinders of the U.S.
Department Transportation (DOT); or the Standard
for Cylinders, Spheres and Tubes for Transportation of
Dangerous Goods and Commission, CAN/CSA-B339, as
applicable;
• Provided with a listed overfilling prevention device; and
• Provided with a cylinder connection device compatible
with the connection for the appliance.
• Cylinder must have include a collar to protect the
cylinder valve
Loading ...
Loading ...
Loading ...