Loading ...
Loading ...
Loading ...
Fig. 1
_i'_i1" C,; I:'!../-\T E
..... id
There are a few times when you want to
control the feeding of the fabric
yourself. Raise needle to its highest
position and raise presser foot. Attach
darning plate over needle plate shown in
Fig. 1. You may then determine the
movement of the fabric yourself.
/
Light and Power Switch
Fig. 2
1_ Fng 3
The light and power switch shown in
Fig. 2 provides the electric current for
the motor as well as the light, in order to
operate the machine, this switchlmUst
be on.
To turn on the light, depress the switch.
If you are interrupted while sewing and
must leave the machine unattended,
just turn off the switch and the maichine
cannot be started accidentally.
The sew!ng light is located inside the
face cover plate as shown. To replace
the bulb, push switch to off, unplug
machine and swing the face cover plate
open. Push up on the bulb slightly and
turn bulb to the left, Remove bulb from
socket. Push in new bulb and turn to the
right.
Loading ...
Loading ...
Loading ...