Loading ...
Loading ...
Loading ...
• Loud 85 decibel alarm.
• Independent smoke and carbon monoxide sensors.
• Smoke alarm takes precedence when both smoke and
carbon monoxide are present.
• Powered by 120V AC (60 Hz, 7.5mA max) wire-in connector
and sealed 3V Lithium battery backup.
• Interconnectable to other Kidde/Nighthawk brand smoke and
CO alarms (see page 15 for details).
• Alarm/Voice message warning system that alerts you of the
following conditions in the manner described below, thus
eliminating any confusion over which alarm is sounding:
FIRE: The alarm/voice pattern is three long alarm beeps
followed by the verbal warning message “FIRE!” This pattern
is repeated until the smoke is eliminated. The red LED light will
flash with the alarm beeps.
CARBON MONOXIDE: The alarm/voice pattern is four short
alarm beeps followed by the verbal warning message
“WARNING! CARBON MONOXIDE!". This continues until the
unit is reset or the CO is eliminated. While powered by battery
only, after four minutes the alarm/voice pattern will sound
once every minute. The red Light Emitting Diode (LED) light will
flash while in alarm/voice mode.
LOW BATTERY: If the battery is low, the red LED light will flash
and the unit will “chirp” every 60 seconds, followed by the
warning message “LOW BATTERY.” This alarm contains a
sealed 3V Lithium battery, which will last the life of the alarm.
No need to replace batteries. This cycle will occur once every
minute and will continue for at least seven days. Under battery
power, the "LOW BATTERY" voice only occurs once every 15
minutes.
• Voice Message System that alerts user to the following
conditions:
– Only for smoke alarm Hush
System announces “HUSH MODE ACTIVATED” when
the unit is first put into HUSH Mode.
Features
4
2550-7201-01(i12010SCO)_V4.qxd:_ 2014.2.20 10:24 AM Page 6
Loading ...
Loading ...
Loading ...