Loading ...
Loading ...
Loading ...
User instructions
16
3.3 Wash programs
Before starting a wash program, check that:
The water supply tap is open.
The softener container contains regenerating salt.
The correct amount of detergent has been added to the
dispenser.
The baskets have been correctly loaded.
The spray arms are able to rotate freely and without
obstruction.
The dishwasher door is firmly closed.
SWITCHING ON
With the door open, press the ON/OFF button on the top panel to switch
on the dishwasher. The LED on the button and the DISPLAY light up.
PROGRAMMING
All programming operations are only possible with the door open and the
dishwasher switched on.
Select the wash program on the basis of the temperatures and type of
soiling stated in the program table.
STARTING THE PROGRAM
Select the program required (the light comes on) and any options
(after selecting the program);
Press the start button (the light comes on and the program's name
and estimated time appear on the front panel); the selected program
light flashes for a few seconds;
Close the door: the start light goes out and the program starts.
N.B.: The door must be closed within about 4 seconds; otherwise the
selected program light stops flashing and the start button will have to be
pressed again before the door is closed to start the program.
Loading ...
Loading ...
Loading ...