Loading ...
Loading ...
Loading ...
25
If the USB flash drive the file is being exported to already contains the
sth-prof.bpf file, the LED screen will display the question, “Export profile and
overwrite the sth-prof.bpf file?” If you want to overwrite the file on the USB
flash drive, press the select button to start the export process. If you do not
want to overwrite the file on the USB flash drive, press the cancel/exit button
to cancel the export.
5� After the export is complete, remove the USB flash drive and secure the cover
on the USB port with a Phillips screwdriver�
6� Insert the USB flash drive into a computer, and log in to the Blend Wizard
(my�blendtec�com)� Follow the instructions on the site to transfer the profile to
your account�
4.2.10 Blender Settings
You can change various blender settings for optimal blending performance and
function based on your needs�
Enclosure Safety Mode
The enclosure safety feature prompts you to ensure the sound enclosure lid
is closed during motor operation� It will also turn off the motor if you raise the
sound enclosure during blending�
To enable or disable the enclosure safety feature, complete the following steps:
1� Press and hold the cancel/exit button for 3 seconds�
2� Use the scroll button and then select Settings from the menu by touching the
select button�
3� Use the select button to choose the Enclosure Safety Mode�
4� Use the select button to toggle between disabling and enabling the enclosure
safety feature�
5� Press the cancel/exit button to return to the previous menu�
Screen Standby Time
You can adjust the length of time before the blender switches to standby mode
(15 minutes, 1 hour, 6 hours or 12 hours)�
To select a new standby time, complete the following steps:
1� Press and hold the cancel/exit button for 3 seconds�
2� Use the scroll button and then select Settings from the menu by touching the
select button�
3� Use the scroll button and then select Screen Standby from the menu by
touching the select button�
4� Use the scroll button to find your desired standby time, then press select�
5� Press the cancel/exit button to return to the previous menu�
Blend Cycle Pause
When in automatic mode, this setting allows you to pause and resume a blend
cycle at the same time and speed�
To enable or disable the Blend Cycle Pause feature, complete the following steps:
ENGLISH
Loading ...
Loading ...
Loading ...