Loading ...
Loading ...
Loading ...
pg-6
RBT Mini
®
AlcoLimit
®
PERFORMING A BREATH ALCOHOL TEST
STEP 1.
Ensure you have waited 20 minutes since your last alcoholic drink.
Insert a new mouthpiece into your AlcoLimit RBT Mini Breathalyser and press the
power button ON.
STEP 2.
Open the Alcond app and press ‘START TEST’.
Select the User. You can have 2 user’s data saved separately. Historical data can be
viewed by pressing on the graph icon at the bottom of the screen.
STEP 3.
The AlcoLimit RBT Mini will warm up to a count of 100. At 95 take a deep breath
and prepare to test.
START BLOWING will appear on the screen when it is ready.
STEP 4.
Blow into your AlcoLimit RBT Mini Breathalyser with a strong consistent breath. It
will take about ve seconds. You should hear/feel the fuel sensor pump click,
indicating it has received enough air-ow. ‘ANALYZING’ will appear on the display.
STEP 5.
Once your AlcoLimit RBT Mini Mobile Breathalyser has analysed the sample, it will
send the reading to your mobile device and your %BAC reading will appear on
the display (along with your photo if the camera is set to ON).
If an insucient breath sample is taken an error message will appear on the
screen. Press OK to retest. The result will be marked as a ‘D’ in the results graph.
The %BAC result will remain on the screen for 15 seconds before you can proceed.
STEP 7. Press the Cog/Settings symbol in the bottom right.
Select your “Limit Line.”
In ‘Stand alone’ mode this is the level at which the red light will illuminate
to show you are over your designated level. Below this level the green
light will illuminate.
TURN ON Sound and TURN ON Camera, if you would like the app to take
your photo while testing.
Loading ...
Loading ...
Loading ...