®
We have taken great care to give your new washer the most convenient and easy-to-use features. Use this guide to help optimize the use of your
washer. Consult the Use and Care Guide for more detailed instructions. To contact the Sears Service Center, call 1-800-4-MY-HOME e (1-800..469-4663).
WATER LEVEL WASH / RINSE TEMP OPTIONS SPEEDS Ael_Ar /SI_It_
Warm /
Cold _
Warm
Warm
Models/Modelos/Modeles 110.2692_, 2694_, 26965-
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can resuff in
death, fire, or electrical shock.
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
Measure detergent and pour into washer.
Drop sorted load loosely into washer. Load evenly around
agitator to maintain balance.
Close the lid.
Adjust controls based on your load.
Pull out Cycle Selector (Timer) knob to start.
Push in Cycle Selector (Timer) knob to stop the washer.
You should select the wastVrinse water temperature
based on the type of load you are washing. Always use
the warmest wash water safe for fabric and follow garment
label instructions. Depending on location, water
temperatures may vary by season. The fill rate may also
differ depending on the water temperature selected.
Your washer has an Automatic Temperature Control (ATC).
ATC electronically senses and maintains a set water
temperature in the washtub by alternating between incoming
hot and cold water.
_, ,J J
Adjust to load size. Clothes should move freely. To change the water level after the wash action starts, you may turn knob to desired
setting. On models with Variable Water Level Control, you can change the water level by turning the knob to Reset, then to the desired
etting. This is necessary only when the change needs to be done once the machine has started to fill.
8566913
}
Continued on back
Loading ...
Loading ...
Loading ...
