Loading ...
Loading ...
Loading ...
10
2. Setting up the monitor
The OSD Menu
Below is an overall view of the structure
of the On-Screen Display. You can use
this as a reference when you want to
work your way around the different
adjustments later on.
Note
If this display has "DPS" for ECO design,
the default setting is "ON" mode: it
makes the screen looks slightly dim; for
optimum brightness, enter to the OSD
to set "DPS" to "OFF" mode.
Main menu Sub menu
Picture
Input
OSD Settings
Setup
Language
Color
PIP/PBP
Picture Format
Brightness
Contrast
Transparency
OSD Time Out
Resolution
Notication
DisplayPort
Reset
English, Deutsch, Español, Ελληνική, Français, Italiano,
Maryar, Nederlands, Português, Português do Brazil,
Polski , Русский, Svenska, Suomi, Türkçe, Čeština,
Українська, 简体中文, 繁體中文,日本語,한국어
Color Temperature
sRGB
User Dene
1 HDMI 2.0
SmartResponse
SmartContrast
Gamma
Pixel Orbiting
Wide Screen, 4:3, 1:1
0~100
0~100
O, 1, 2, 3, 4
5, 10, 20, 30, 60
On, O
1.1, 1.2
Native, 5000K, 6500K, 7500K,
8200K, 9300K, 11500K
Red: 0~100
Green: 0~100
Blue: 0~100
O, Fast, Faster, Fastest
On, O
1.8, 2.0, 2.2, 2.4, 2.6
O, PIP, PBP
1 HDMI 2.0,2 HDMI 2.0, DisplayPort, USB C
PIP / PBP Mode
PIP / PBP Input
On, O
Sharpness
0~100
PowerSensor
On
O
0, 1, 2, 3, 4
LowBlue Mode
On
O
1, 2, 3, 4
LightSensor
On
O
2 HDMI 2.0
DisplayPort
USB C
Over Scan
On, O
On, O
Small, Middle, Large
Top-Right, Top-Left, Bottom-Right, Bottom-Left
PIP Size
PIP Position
Auto
On, O
Audio
0~100Volume
On, O
HDMI1, HDMI2, DisplayPort, USB C
Mute
Audio Source
Swap
User 1
User 2
Audio Source, Volume, Input, PowerSensor
Brightness, Input, MultiView, Volume
USB Setting
USB
USB Standby Mode
USB 3.0, USB 2.0
On, O
Yes, No
Information
DPS
(available for selected models)
5
Resolution notification
This display is designed for optimal
performance at its native resolution,
3840 x 2160 @ 60 Hz. When the display
is powered on at a different resolution,
an alert is displayed on screen: Use
3840 x 2160 @ 60 Hz for best results.
Display of the native resolution alert can
be switched off from Setup in the OSD
(On Screen Display) menu.
Display of the native resolution alert can
be switched off from Setup in the OSD
(On Screen Display) menu.
Note
The USB hub default setting of USB C
input for this monitor is “USB 2.0”. The
resolution supported by USB2.0 is 3840
x 2160@60Hz. When you switch to USB
3.1, the resolution supported will be
3840 x 2160 @ 30Hz.
Loading ...
Loading ...
Loading ...