Loading ...
Loading ...
Loading ...
Press the Grocery Savor touch pad to set the freezer and
refrigerator to the lowest temperature settings. Press the
Grocery Savor touch pad again to return to the normal
refrigerator set point.
NOTE: The Grocery Savor feature will automatically shut off
in approximately 12 hours. When Grocery Savor is on, you
cannot adjust the temperature in either compartment.
@
Acceler-lce
The Acceler-lce feature assists with temporary periods of heavy
ice use by increasing ice production.
• Press Acceler-lce to set the freezer to the lowest temperature
settings. Press Acceler-lce again to return the freezer to the
normal set point.
NOTE: The Acceler-lce feature will automatically shut off in
approximately 24 hours. When Acceler-lce is on, you cannot
adjust the freezer temperature.
@
Door Ajar
The Door Ajar feature sounds a chime every few seconds when
the refrigerator door has been left open for 5 continuous minutes.
The chime will sound until the door is closed or Door Ajar is
turned off. The light bulbs will turn off if any door is left open for
6 continuous minutes. Closing all the doors for 1 second will
cause the lights to come back on.
• Press the Door Ajar touch pad to turn this feature on or off.
The indicator light will be lit when the Door Ajar feature is on.
@
Humidity Control (on some models)
The Humidity Control feature turns on a heater to help reduce
moisture on the door hinge seal. Use in humid environments or
when you notice moisture on the door hinge seal. The refrigerator
uses more energy when Humidity Control is on.
• Press Humidity Control when the environment is warm and
more humid, or if you notice moisture on the door hinge seal.
The indicator light will be lit when humidity control is ON.
• Press Humidity Control again to turn OFF and save energy
when the environment is less humid.
@
Temp Alarm (on some models)
The Temp Alarm feature provides temperature information in the
event of a power outage.
Power outage: During a power outage, if the temperatures in the
refrigerator and freezer compartments exceed normal operating
temperatures, the highest temperature reached will be displayed.
• Press the Temp Alarm touch pad until the indicator light is lit,
to turn on this feature. Press and hold Temp Alarm for
3 seconds until the indicator light goes off, to turn off this
feature.
Temperature alarm: An alarm will sound repeatedly if the freezer
or refrigerator compartment temperatures exceed normal
operating temperatures for an hour or more.
The temperature displays will alternately show the current
temperatures and the highest temperatures the compartments
reached.
• Press the Temp Alarm touch pad once to stop the audible
alarm and alternating temperature displays. The Temp Alarm
light will continue to flash until the refrigerator returns to the
set temperature.
©
Filter Reset (on some models)
The Filter Reset control allows you to restart the water filter status
tracking feature each time you replace your water filter. See
"Water Filtration System."
• Press and hold the Filter Reset touch pad for 3 seconds, until
the Replace light turns off.
Good Replace
@
User Preferences
The control center allows you to set user preferences, if desired.
Temperature Display (F_C)
This preference allows you to change the temperature display.
F - Temperature in degrees Fahrenheit
C - Temperature in degrees Celsius
Alarm (AL)
This preference allows you to turn off the sound of all alarms.
ON - You will hear the alarm sound.
OFF - You will not hear the alarm sound.
Sabbath Mode (SAD)
ON - All control center lights and alarm tones will be disabled.
OFF - All control center lights and alarm tones will be enabled.
NOTE: Press the Door Ajar touch pad for 3 seconds to restore all
lights.
To Access the User Preferences Menu:
1. Press and hold the Door Ajar touch pad for 3 seconds. The
preference name will appear in the Freezer display and the
preference status (F or C) or (ON or OFF) will appear in the
Refrigerator display.
2. Use the Freezer Up Arrow or Down Arrow touch pads to scroll
through the preference names. When the desired preference
name is displayed, press the Refrigerator Up Arrow or Down
Arrow touch pads to change the preference status.
3. Set your preferences by pressing and holding the Door Ajar
touch pad for 3 seconds.
IMPORTANT:
• If you did not flush the water system when the refrigerator
was first installed, see "Water System Preparation" for
instructions on flushing the water system.
11
Loading ...
Loading ...
Loading ...