Loading ...
Loading ...
Loading ...
EN-6
EN
Copyright © 2020, Fast ČR, a. s. Revision 05/2020
VACUUMING OF LIQUIDS AND WATER
This vacuum cleaner can also be used to vacuum liquids and water. If vacuuming liquids ensure that the
vacuuming angle is approximately 45° so that water is not sucked in through the filter.
When vacuuming water it is necessary to maintain the maximum allowable level (as is marked by a line
on the container).
Note:
When pouring out the water from the container hold the vacuum cleaner, if possible, with
the suction nozzle pointing downwards so that water does not enter the motor and cause ir-
reparable damage.
REMOVAL OF DUST, CLEANING AND MAINTENANCE OF THE PRODUCT
Before cleaning the product turn it off and disconnect it from the power source. Press the button for
releasing the filter cover. The filter cover will come away from the body of the product, and then take
out the filter from the cover. Remove all dirty material from the cover.
Cleaning the filter: remove the dust and dirty material from the filter or shake it above a rubbish bin so
that the dirty material does not fall our over the sides.
If necessary, wash the filter, you can use a weak soap solution and lukewarm water. Allow the filter to
dry.
Note:
Before inserting the filter back into the product it must be completely dry.
We recommend cleaning the filter after every use. Attaching the cover: Insert the filter into the cover
and place on the product.
To clean the product, do not use cleaning agents that cause abrasion, petrol or solvents, for cleaning we
recommend a cloth moistened in a weak neutral detergent solution.
Before storing the product, thoroughly clean it and place in a dry location.
Problem Possible cause Possible solution
The product does not
function
the product wasn't recharged
before use
connect the product to the power
supply (recharge the batteries)
the rechargeable batteries are
installed incorrectly
contact a service centre
the product needs to be tuned contact a service centre
The product does not
vacuum, or its power is
too low
The filter cover for dirty mate-
rial is full
Remove the dirty material from
the filter cover
discharged batteries
connect the product to the power
supply (recharge the batteries)
Dirty material is coming
out of the product
The cover for dirty material
is full
remove the dirty material from
the filter/filter cover
Hand Vacuum Cleaner
SVC 190B / SVC 190W / SVC 190R
Loading ...
Loading ...